•	Specification
•	Physical Properties
•	Data Sheet (PDF)
•	MSDS
•	Approvals and Compliance
•	Recommended Thicknesses
•	Installation
•	Size and Dimension

Chilled Water Pipe Insulation Systems

Dyplast offers complete insulation systems for piping that operate at below-ambient temperatures, such as chilled water pipe insulation and refrigerant mechanical insulation. Such mechanical insulation applications present special challenges due the possibility of water vapor movement to the cold surface. Phenolic and polyiso mechanical insulation systems have been demonstrated as optimal for this environment.

If the operating temperature of the system is below the dew point of the ambient air, condensation will occur on the cold surface, creating a vapor pressure gradient through the system. This vapor pressure gradient serves as the driving force for water migration toward the cold surface of the chilled water pipe insulation system. If these conditions remain for extended periods of time, a significant amount of liquid water can accumulate in the system. Below-ambient systems therefore require special attention to the design to maintain thermal performance.

ISO-C1 is our Class 1 rigid foam polyisocyanurate insulation produced under strict quality control with proprietary formulations. Our ISO-C1 production line using hydrocarbon blowing agents produces polyiso bunstock with superior physical characteristics, high R-factor, and zero ozone depletion potential (zero-ODP), making it a cost-effective and environmentally friendly choice. Suitable for service temperatures between -300F and +300F, ISO-C1 is ideally suited for chilled water pipe insulation, tank insulation, and other chilled water system insulation applications - - including HVAC insulation.

ISO-C1 is highly moisture resistant, strong, durable, and lightweight. It handles, works, and installs easily. ISO-C1's low friability means it creates minimal dust. Our recommended chilled water pipe insulation system, with ISO-C1 as the base, includes the optimum vapor retarders, mastics, sealants, adhesives, and tapes to meet your specific chilled water application needs.

DyTherm Phenolic insulation our comparable insulant offering that meets 25/50 flame/smoke ratings with superior thermal efficiencies.

With the highest R-value to thickness ratio of commercially available insulation, no other insulations compare. Contact Dyplast Products for more information.

ISO-C1 polyisocyanurate insulation, particularly in low-temperature applications, is a superior choice over alternative products such as cellular glass, polystyrene, perlite, fiberglass or polyurethane insulation.

Cryogenic Insulation - Civil Insulation - Architectural Forms - Mechanical Insulation - Sustainable Construction - Refrigeration - Transportation Insulation - Process Piping Insulation - LNG Insulation - Chilled Water System Insulation

Chilled Water Pipe Insulation Systems

What Is Polyisocyanurate Foam?

Dyplast Pipe Insulation