| Feb 1, 2012 |
Dyplast issues its Case Study on a large GeoFoam Project at Sharpes Ferry Bridge in Florida |
| Sep 1, 2011 |
Customer Bulletin 0911: Dyplast Products Sales Team Members Now NIA’s Certified Energy Appraisers |
| Jun 30, 2011 |
Customer Bulletin 0611: Dyplast issues Customer Bulletins 0611 providing information on corrosion under insulation (CUI) on pipe in low-temperature temperature applications. |
| May 29, 2011 |
Customer Bulletin 0511: Dyplast issues Customer Bulletins 0511 on questions you should ask when selecting mechnical insulation for below-ambient temperature applications. |
| April 30, 2011 |
Customer Bulletin 0411: Dyplast issues Customer Bulletin 0411 providing a discussion of pipe and equipment insulation used in refrigeration applications. |
| March 15, 2011 |
Customer Bulletin 0111: Dyplast issues another in its series of Customer Bulletins. Bulletin 0111 provides a quantitative performance/cost comparison of ISO-C1 polyiso and XPS PIB (extruded polystyrene pipe billet) insulation. |
| August 20, 2010 |
Press Release 082010: Dyplast receives its ICC Evaluation Report (ESR-2052) elaborating International Code Council certifications for ISO-C1® and EPS insulation |
| July 15, 2010 |
Customer Bulletin 0710: Dyplast issues its Technical Bulletin on a comparison of EPS and XPS Insulation. |
| July 8, 2010 |
Press Release 070810: Dyplast Launches its DyTherm™ Phenolic insulation and DyPerm™ Vapor Barriers |
| June 1, 2010 |
Customer Bulletin 0610: ISO-C1® vs. FOAMGLAS®: Dyplast issues a Technical Bulletin on the comparison of ISO-C1 polyiso pipe insulation versus FoamGlas cellular glass insulation |
| May 1, 2010 |
Customer Bulletin 0510: Dyplast issues its Technical Bulletin on Polyisocyanurate versus Polyurethane insulation. |
| April 2, 2010 |
Customer Bulletin 0410: ISO-C1 vs. HiTherm HT-300: Dyplast sends Customer Bulletin-0410 which is another in the series of comparative Technical Bulletins aimed at providing our clients and friends with objective criteria by which to compare alternative products. This bulletin compares ISO-C1 with HiTherm's HT-300. |
| March 20, 2010 |
Customer Bulletin 0310: ISO-C1 vs. XPS: Dyplast sends a Customer Bulletin-0310 to its clients, fabricators, professional colleagues, and friends on comparisons of its ISO-C1 polyisocyanurate insulation to extruded polystyrene (XPS). [Note: Since products evolve, this document may now contain dated information; even though the conclusions drawn are still credible, readers should request updated information from supplier. See also Customer Bulletin 0111.] |
| March 8, 2010 |
Press Release 030810: Dyplast Hires hires Joseph Hughes to assume executive responsibilities for ISO and Phenolic products. |
| February 15, 2010 |
Customer Bulletin 0210: Dyplast releases its Technical Bulleting on ISO-C1 versus Fiberglass Pipe Insulation |
| February 1, 2010 |
Press Release 020110: Dyplast Products will be exhibiting its insulation products at the Composites Exhibition and Convention at Mandalay Bay, Las Vegas, February 9-11, 2010. |
| January 20, 2010 |
Customer Bulletin 0110: Polyiso Life-Cycle_Analysis: Dyplast presents another phase of its polyisocyanurate Life Cycle Analysis: an LCA pictorial (PDF download 3.8mb). |
| January 11, 2010 |
Press Release 011110: Dyplast will be exhibiting at the AHR Expo January 25-27. |
| January 1, 2010 |
Press Release 010110: Dyplast hosts its annual awards ceremony for staff, friends, and clients. |
| November 19, 2009 |
Press Release 111909: One of Dyplast's Key Clients "Elite Aluminum" has earned the Energy Star® rating for its roof system! In October 2009 Elite announced its partnership with Energy Star when all thicknesses of the Elite Polar White Roof Panel qualified for the progrom.
The panel had undergone a series of rigorous tests to prove that it met or exceeded energy efficiency guidelines established by the US
Environmental Protection Agency (EPA) and the US Department of Energy (DOE).
Elite utilizes Dyplast's expanded polystyrene in its energy-efficient roof and wall panels |
| November 9, 2009 |
Customer Bulletin 1109: Energy Savings and GWP: ISO-C1 offers the highest Energy and GWP payback in the Industry. The technology to reduce Global Warming and our dependence on petroleum imports is readily available. ISO-C1 insulation offers a low cost solution to Global Warming and our Energy Dependence! (read more) |
| September 15, 2009 |
Customer Bulletin 0909: Flame Spread & Smoke Development: Dyplast provides more information to its clients on ISO-C1 flame spread and smoke development. (read more). |
| April 30, 2009 |
Press Release 043009: Dyplast and its partners have completed all shipments of its ISO-C1 polyisocyanurate insulation to the Elba Island LNG (Phase 3) faciltiy south of Savannah, GA. This is Dyplast's third LNG project supporting Chicago Bridge & Iron as prime contractor, this time for Elba Island Phase 3. Dyplast has been awarded at least half of all new LNG projects in the US over the last 4 years. |
| April 15, 2009 |
Customer Bulletin 0409: ISO-C1 Thermal Resistance: Dyplast announces that third-party testing has confirmed that its ISO-C1 polyisocyanurate bunstock insulation has superior thermal resistance (6.7 initial and 5.7 aged R-factor) of any competitive insulation. K-factors at 2", 3", and 4" thickness proved industry-best at 0.1763, 0.1762, and 0.1756, respectively. [K-factors at lower temperatures are even better]. |
| January 29, 2009 |
Customer Bulletin 012909: ISO-C1 UL/FM Approvals: ISO-C1/ 2.0 is verified as the only two pound density polyisocyanurate bunstock foam that has both UL Listings and FM Approvals for Class 1 flame spread and smoke development. UL and FM are two of the most respected testing agencies in the world, and a certification by either is challenging. Furthermore, to our knowledge, no other U.S. manufacturer is or certified with an independent lab to have passed Class 1 ASTM E84 standards. To maintain our certifications with the testing agencies, Dyplast Products is required to undergo on-site audits up to 4 times per year. |
| January 1, 2009 |
Press Release 010109: Dyplast officially launches its new polyisocyanurate insulation, ISO-HT, capable of handling services temperatures up to 375F (up to 400F intermittent) while delivering the superior insulating efficiencies. |
| December 1, 2008 |
Press Release 120108: Dyplast Products, in concert with fabricators and installers, was awarded its third contract with Chicago Bridge & Iron (CBI) for its Elba Island Phase 3 LNG Project (Liquid Natural Gas). |
| August 15, 2008 |
Press Release 081508: Dyplast has hired Michael Cartmell as Vice President of Technology. Mr. Cartmell will accelerate Dyplast's focus on utilization of polyiso and polystyrene rigid foams as superior insulation alternatives. Mr. Cartmell will lead all new product development projects, as well as manage quality control, production, and customer outreach. |
| January 1, 2008 |
Press Release 010108: Dyplast celebrates its 50th year of continous operations under the Dyplast brand. |
